- 2×6 Digit display, double PRESET, double OUT, up/down counter Measurement range: -19.9 ℃ to +80.0 ℃, 5% to 95% RH
- Counts switch, proximity switch & incremental encoder input
- Password protection
- Selectable input frequency
- Allows selection of input frequency and offers calibration constants ranging from 0.00001 to 9.99999.
- Decimal point selection is customizable, ranging from 1st to 3rd digit
- Provides 7 input and 10 output function options
- Adss “OFFSET” to Count Value
- PRESET1; Absolute / Relative option
- OUT functionality includes latch or 0.1 to 999.9 seconds pulse
- Loads count value & OUT status at the latest power failure after the first power on
- RESET via front panel
- Displays values of Preset 1 and Preset 2
- EEPROM memory to store settings
| Parameter | Measured Values |
| Panel Hole Sizes | 67x67mm |
| Display | 2×6 Digit 7 Segment display |
| Count Input | 2 x (Max: 7500 Hz, 5-30V) |
| NPN Selection | Connect “npn select” to “+12V” to select NPN sensor for Cp1 and Cp2. Reset input is always PNP. For totem pole or PNP type sensor “npn select” left unconnected. |
| Sensor Types | PNP/NPN proximity switch - NPN/PNP/Totem-pole output encoder |
| Input Frequency | 20, 50, 2500, 7500 Hz Selectable. |
| Reset Input | 10ms (min) , Positive input (PNP only) (5…..30V) |
| Output | Out1, Out2; 2x Relay (O-NO-NC), 250VAC, 2A, Rezistif Yük 2x Open Collector (NPN), 30V, 100mA max. |
| Sensor Supply | 12VDC, 50mA(max.) unregulated |
| Supply Voltage | 100…240VAC, 50-60Hz |
| Power Consumption | < 8VA |
| Operating Temperature | -20℃….55℃ |
| Operating Altitude | < 2000m |
| Out & Alarm Output | Relay (NO + NC), 250VAC, 2A, Resistive load |
| Sensor Failure | Measurement out of range or Hardware fails, OUT outputting is first OFF for T0f and then ON for T0n periodically. For continuous OFF, enter T0n=0 and T0f=0. For continuous ON, enter T0n=1 and T0f=0. In case of sensor failure, measurement out of range or hardware fails, and alarm type is selected as “SnS”, ALARM output is always ON, otherwise under normal in scale measurement, always OFF |
| Supply Voltage | 100 to 240VAC, 50-60Hz |
| Power Consumption | < 6VA |
| Humidity | < 70% (non-condensing) |
| Altitude | < 2000m |
